tying wire Infaco AT1000
€155,00
Regular price
Sale price
€155,00
tying wire for the Infaco AT1000
The Tying wire for the Infaco AT1000 and AT100036 battery binding device is a steel wire with a paper envelope. Infaco calls this Guipé. The paper is completely renewable and keeps the wire away from the wood so that it does not cut the rod.
You buy a carton with 20 coils. Each coil has 400 meters of wire and is sufficient for more than 3000 bindings. The bond lasts 8 to 12 months. Which strength matches the cut and location depends on the binding and the climate.
Diameter
The price is for the box, net, and is the same for all three strengths.
| Wire | Article 1 | Length per coil | Weaves per coil | Holding |
|---|---|---|---|---|
| 0,36 mm | ATCB36 | 400 m | more than 3000 | 8 to 12 months |
| 0,40 mm | ATCB40 | 400 m | more than 3000 | 8 to 12 months |
| 0,44 mm | ATCB44 | 400 m | more than 3000 | 8 to 12 months |
The group picture also shows the double coil 2 × 0.36 mm (ATCB236, 350 m, more than 2600 bindings). This is a separate article and is not included in this product.
Depository
- The spool comes into the unwinder on the belt. The label that holds the spool together stays on.
- Guide the wire through the outlet opening until it strikes, then press the trigger.
- The first binding after a bobbin change can pass by. Remove the wire residue from the beak and repeat the binding.
Infaco advises against using other coils. Foreign coils can release the binding prematurely and cause faults to the device that are not covered by the warranty. The coils are made in France. The information comes from the Infaco manual and is non-binding.
Appropriate to Battery binding device Infaco AT1000.